Home Bunting-Redditch

Tag: Bunting-Redditch

Post
Bunting Sponsors REPM 2023

Bunting Sponsors REPM 2023

Bunting has signed up as a gold sponsor of REPM 2023, the 27th international workshop on rare earth and future permanent magnets and their applications (3rd-7th September, University of Birmingham). The biennial workshop is co-organised by SUSMAGPRO partner University of Birmingham and brings together scientists and engineers working on rare-earth permanent magnets and their applications. The workshop...

Post
Record-breaking year for Bunting-Redditch

Record-breaking year for Bunting-Redditch

Bunting-Redditch registered a record-breaking sales output in 2022. Despite the global economic challenges, the demand for Bunting’s metal separation equipment has never been higher. Equipment sales to companies in the recycling, plastics, mining, and mineral processing sectors drove sales growth in the year. Bunting is one of the world’s leading designers and manufacturers of magnetic separators, eddy...

Post
Zixtel Ltd evolves with Bunting’s Eddy Current Separator

Zixtel Ltd evolves with Bunting’s Eddy Current Separator

THE Zixtel evolution began in the midst of the global pandemic in 2020, when the company changed their focus to recycling and purchased the Bunting Metal Separation Module. Zixtel Ltd have since developed a reputation for metals recovery from a wide range of waste electrical and electronic equipment (WEEE) and waste discarded by other recycling companies....

Post
HML Recycling operate Bunting magnetic separators

HML Recycling operate Bunting magnetic separators

EFFECTIVE metal separation is one of many important processes in HML Recycling’s specialist metal recycling operation in Accrington, UK. HML has installed Bunting Permanent Overband Magnets in their cable recycling process, and a Metal Separation Module on a new line for recycling perfume bottle tops. Bunting is one of the world’s leading designers and manufacturers of...

Post
Post-assembly magnetisation at Cenex LCV

Post-assembly magnetisation at Cenex LCV

POST-ASSEMBLY magnetisation of permanent magnet rotors is the most cost effective and accurate way to produce these vital components for electric vehicle motors.  Bunting is promoting such post-assembly magnetising manufacturing techniques on stand C4-607 at the Cenex LCV Event (7-8 September, UTAC, Millbrook, UK). Bunting is one of the world’s leading designers and manufacturers of...

Post
Parry & Evans recover metal with Bunting magnetic separators

Parry & Evans recover metal with Bunting magnetic separators

RECYCLING specialist Parry & Evans has installed Bunting magnetic separators to recover metal from pre-sorted domestic waste. At their Deeside plant, the company uses a Permanent Overband Magnet to recover ferrous metals such as steel food cans, and an Eddy Current Separator to reclaim valuable aluminium including drinks cans. At the Deeside recycling facility, Parry &...

Post
Fine metal recovery with Bunting at RWM & Letsrecycle Live

Fine metal recovery with Bunting at RWM & Letsrecycle Live

SEPARATING and recovering fine metals is Bunting’s focus at the RWM & Letsrecycle Live show (14-15 September 2022, NEC Birmingham).  On stand R-N50, visitors will see metal separation equipment in operation recovering fine non-ferrous metals and stainless-steel.  On the stand is an Eddy Current Separator, SSSC Stainless Steel Separator, and an ElectroStatic Separator. Bunting is...

Post
40-Year Old Hillhead still attracts Bunting

40-Year Old Hillhead still attracts Bunting

THE first Hillhead was held in 1982 and over those 40 years Bunting has manufactured and supplied thousands of magnetic separators and metal detectors for use in the aggregate and recycling industry.  Once again, Bunting is exhibiting at the 2022 show, helping companies solve metal separation and detection problems from stand C9. Bunting is one...