WRA reassures businesses ahead of RPS 250 deadline

As the deadline for the new demolition waste wood regulations approaches, the Wood Recyclers’ Association (WRA) wants to assure businesses that only a small portion of material will be affected by the change. Additionally, the WRA states that this impact can be further reduced with proper testing.

From Friday (1st September), the Environment Agency is withdrawing Regulatory Position Statement (RPS) 250. This means that a small number of potentially hazardous ‘amber’ waste wood items from pre-2007 buildings can no longer be processed as non-hazardous unless sent off for a simple test to show they are not.

As the deadline approaches, the WRA has been inundated with queries from those handling demolition waste wood about preparing for the change, with many confused about what to do or how it will impact their businesses.

In response to this, the WRA is advising businesses to:

  • Ensure their procedures, protocols and staff are up to date ahead of the 1st September deadline, so they reflect and understand the changes
  • BUT bear in mind that the changes only relate to ten* specific items from 1950-2007 buildings – so it’s not all waste wood items
  • This material has up until now been treated as non-hazardous and has a hazardous content estimated at less than 1% of the waste wood stream
  • This volume of material can be reduced even further if businesses submit samples for testing. Using WRA02 test suite will also reduce costs for any businesses
  • It is critical that all results are shared with the WRA to broaden our evidence base – all laboratories will do this, but they need to be asked to
  • There are many resources available from the WRA to help, including this Toolkit, which now includes an updated FAQ. This is all available on the WRA website, www.woodrecyclers.org

Vicki Hughes, Technical Lead on the WRA Board, said: “We have been working tirelessly at the WRA for the past five years to reduce the impact of this change on the industry and to prove that the vast majority of waste wood is non-hazardous. Thankfully, only ten items are now left to classify, but in the absence of the correct number of samples, these will soon be deemed potentially hazardous.

“So we urge businesses to take as many samples of these amber items as possible so we can reduce this number even further. Importantly, these samples must each be individual items from different wood types on different sites, and the results must be shared with us at the WRA. A Quick Guide is also available to ensure the samples are taken correctly.”

“Through testing, we can dramatically reduce the profile of what is classed as hazardous, saving businesses money and ensuring that as much material as possible is recycled.

“We have a number of resources available which can clarify what exactly you need to do. By using these, you can help ensure this material is not simply classed as hazardous and sent for expensive hazardous disposal, risking thousands of tonnes of valuable material being lost, when in reality, only a very small proportion is, with the bulk of all waste wood still non-hazardous.”

If you want to find out more, the WRA will be on hand at the RWM Expo (13-14th September at the Birmingham NEC) on stand R-N211 to answer any questions you may have.

*The ten potentially hazardous items from pre-2007 buildings are: barge boards; external fascia; soffit boards; external joinery; external doors; roof timber; tiling cladding; tiling battens; timber frames and timber joists.

Leave a Reply

Your email address will not be published.